Welding machines

 

Socket Welding Machines


Socket Welding Machine WIDOS

WIDOS 7511 Socket Welding Machine.

WIDOS 7511 Socket Welding Machine.

Welding machine for socket fusion of PE, PP and PVDF- pipes and fittings from Ø 20 up to OD 75. Movement of the socket fusion is driven by rack and pinion mechanism; ongoing monitoring of the prism voltage of all external diameters. Double prism through tube, single prism with insertion stop at the fitting; can be adjusted in the axial plane. The penetration depth is adjusted with the stop. Pivoting heating element, on / off switch, electronic temperature control and monitoring in accordance with DVS, (230 V, 630 W.). Drawer for tool and spigot / socket. Comes in a steel box for storage and transport (67 x 50 x 35 cm).

Available for:

DVS 2208-1 Type A, DVS 2208-1 Type B, ASTHMA (mm) ASTM and (inches)

widos7511C[1] widos7511B[1]

A and B and can be welded joints Aquatherm, it is selected by ordering the machine.


It’s that easy to operate the machine:

Tighten the fittings in the prism holder, firmly against the stop. – Set the adjusting wheel to zero. –

Put the tube in the tube holder so that it touches fittings, and tighten prism holders. –

Run holders from each other (opened). – Set the adjusting wheel on the pipe dimension.

Turn the heater with spigot / socket down between topics. –

Run pipe and fitting on / in the spigot / socket until offset the spigot is flush with fittingsholder. –

Run pipe and fitting from the spigot / socket (opened). – Swing the heating element up. – Run the machine together against the stop. (Close)

After the end of the cooling time, the weld joint can be removed from the machine and the welding process is complete.

User Manual (EN)



 

Widos 35XX Socket Welding Machine

Widos 35XX Socket Welding Machine

35XX is a versatile machine for sleeve-mandrel welding of pipes and fittings of PE, PP, PVDF from 20 up to 125 mm.

Clamping tool at WIDOS 35xx can be shifted respectively. turned fully. In particular, the short pipe pieces are welded. The machine is very light and compact.

The machine can also be used for the simplest version of the manual butt welding with mounted teflon coated welding plate (Optional).
Short pipe ends can be welded by means of slidable, respectively,. brand rotary tensioning tool.

Due to the weight of only 44 kg, the machine is easy to transport. In addition, the machine can be disassembled for transport.

Available for:

DVS 2208-1 Type A, DVS 2208-1 Type B, ASTHMA (mm) ASTM and (inches)

Spigot/socket - 35XXb 35xxc heating plate welding mirror 35xxd Star handle as a hand wheel Widos 35XX Socket Welding Machine Widos 35XX Socket Welding Machine Widos 35XX Socket Welding Machine Widos 35XX Socket Welding Machine

Socket Welding Machine Widos 35XX 230V 1800W incl. heating element and prismatic clamping devices. Ex spigot/socket. Item no. 524.220

Optional:

Spigot/socket, set 20 to 125 mm.

Star handle as a hand wheel. Item no. 524.221

Assembly and transport case. Item no. 524.222

User Manual (EN)


 

 

Widos 3511 Socket Welding Machine

Widos 3511 Socket Welding Machine

Welding machine for socket fusion, AF, PP,PB and PVDF- pipes and fittings from Ø 20 up to OD 125. The machine is mounted on a stable frame. Movement of the socket fusion is driven by rack and pinion mechanism; ongoing monitoring of the prism voltage of all external diameters. Double prism through tube, single prism, with insertion stop, ved fittings; can be adjusted in the axial plane. The penetration depth is secured with a knob, depending on the diameters. The penetration depth is limited by stops. Wheels with depth stop is available as DVS type A – DVS type B – ASTM i mm. and ASTM in inches. Both sides can be adjusted in the axial plane of the setting of items to be welded. Muffesvejseelementet pivotally and built the machine. On-/off-kontakt, electronic temperature control and monitoring in accordance with DVS 2208. The heating element can be removed,  and used as a hand-held. Assembly and transport case 850 x 600 x 680 mm. The machine can be supplied with socket / Dorne DVS type A – DVS type B and ASTM in mm.


Widos 3600 Socket Welding Machine

Widos 3600 Socket Welding Machine

Socket Welding Machine for pipe diameters from 63-160 mm. Double prismatic jaws for pipes and prismatic jaw with depth gauge for fittings.

Electronic heating element 230V 1100W. Transport box that also serves as a work 68x106x60 cm.

For welding of pipes , bends , T-pieces and flanges in PE , PP , PB and PVDF

Available for:

DVS 2208-1 Type A, DVS 2208-1 Type B, ASTHMA (mm) ASTM and (inches)



Socket Welding Machine from HÜRNER

HÜRNER HWT 125-SW Socket Welding Machine

HÜRNER HWT 125-SW Socket Welding Machine

Welding machine for socket fusion, AF, PP,PB and PVDF- pipes and fittings from OD 32 up to OD 125. The machine is mounted on a stable frame. Movement of the socket fusion is driven by rack and pinion mechanism; ongoing monitoring of the prism voltage of all external diameters. Double prism through tube, single prism, with insertion stop, ved fittings; can be adjusted in the axial plane. The penetration depth is secured with a knob, depending on the diameters. Both sides can be adjusted in the axial plane of the setting of items to be welded. The penetration depth is limited by stops. Muffesvejseelementet, on 1,5 kW, is pivotally and built the machine. On-/off-kontakt, electronic temperature control and monitoring in accordance with DVS 2208. The heating element can be removed, and used as a hand-held. Spigot/socket set (Non-stick coated) 32 40 50 63 75 90 110 125 mm.

DVS 2208-1 Type A number 524.101

DVS 2208-1 Type B Item 524.102



Socket Welding Machine from O.M.I.S.A.

OMISA 7125

OMISA 7125 Socket Welding Machine

Welding Capacity Ø 32 – Ø 125 mm. Heating element 230V 1500W Continuously adjustable 50 ° C – 300 ºC. and additional table holds, enabling you to use as a handheld mirror.

Molds – mandrel set Ø 32 – 40 – 50 – 63 – 75 – 90 –110 – 125 mm.

OMISA 7125 Socket Welding Machine OMISA 7125 Socket Welding Machine

The welding machine is supplied with galvanized carrying case that also functions as a work. Comes with adjustable pipe support on stand.

OMISA 7125 Socket Welding Machine OMISA 7125 Socket Welding Machine

Omisa 7125 can be supplied with optional equipment for the welding of reduced branch, as socket welding. (picture below)

Omisa 7125 can be supplied with optional equipment for the welding of reduced branch pipe as socket welding.



OMISA 7125 / LI assembly machine for Socket Welding 

OMISA 7125 / LI assembly machine for Socket Welding

Dimensions 640 x 350 x 100 mm. weight machine 12 kg.

Comes in transport box / work. With tube roller trestle and plug socket-forming mandrels Ø32 to 125 mm.


Calibration tool (CLICK) Chamfering tool (CLICK) Welding Tables (CLICK)

Comments are closed